First, unscrew the low bar of the front wall of the washing machine

[shapanwwuopi]

Because of this nuance, experts often criticize Samsung washing machines, because the heating element is a part that breaks down relatively often.Dismantling the front wall of the machine is associated with the risk of a new malfunction: you can tear the cuff, tear the clamp, break off the plastic tucks so that the front panel will not fit back into place, you can finally tear off the wires of the sensor of the locking element of the hatch. Let's try to act like professionals and remove the front wall without losses.

We take out the powder tray; there are several fasteners in the tray niche; we unscrew them.
We remove the top cover of the washing machine as described above.
We unscrew all the screws holding the control panel and remove the control panel.
Take a screwdriver and carefully pry up the clamp of the qatar telegram data washing machine cuff and remove it (the cuff is an elastic band located around the hatch).
We unscrew the two bolts securing the hatch locking device and pull it out, not forgetting to disconnect the sensor wires.
Very carefully pull out the cuff.
We unscrew the remaining fixing bolts and remove the front wall.
The front wall of the washing machine is removed - you can repair the malfunction. First, let's check the resistance of the heating element contacts. To do this, take a multimeter, connect the probes to the contacts and look at the value on the display. If no malfunctions are found, dismantle the heating element. To do this, unscrew the fastener, which is located in the middle between the heating element contacts, and then, using rocking movements from side to side, pull the heating element out of the tank.

In most cases, a large layer of scale forms on the heating element, which disables the module. If scale has already formed, the heating element must be replaced. Such malfunctions cannot be eliminated, but in the future, remember that you need to use water softeners and then everything will be fine.